Quincy Compressor QT Series Instruction Manual

Also see for QT Series: Instruction manual

Quincy Compressor QT Series Instruction Manual Manual pdf 9 page image

QT/QTS Series Quincy Compressor2022208700, September 2018 7SECTION 3 INSTALLATIONReceiving DeliveryImmediately upon receipt of compressor equipment and prior to completelyuncrating, the following steps should be taken:Step 1) Inspect compressor equipment for damage that may have occurredduring shipment. If any damage is found, demand an inspection fromthe carrier. Ask the carrier how to file a claim for shipping damages.(Refer to SECTION 3, Freight Damage for complete details.)Shipping damage is not covered by Quincy Compressorwarranty.Step 2) Insure that adequate lifting equipment is available for movingthe compressor equipment.Improper lifting can result in component or system damage, orpersonal injury. Follow good shop practices and safety procedureswhen moving the unit.Step 3) Read the compressor nameplate to verify the model and sizeordered.Step 4) Read the motor nameplate to verify that the volt, phase and hertzratings are the same as the electrical power supply connecting tothe motor. NOTE: Do not use a triple voltage (115/208-230)single-phase motor or (208-230/460) 3-phase motor for 208volts or lower. Use a 200 volt or 208 volt motor only.Step 5) Read the pressure relief valve nameplate to be sure it does notexceed the working pressure shown on the compressor or any othercomponent in the system.Step 6) Read and understand the safety precautions containedwithin this manual. The successful and efficient operation ofcompressor equipment depends largely upon the amount of caretaken to install and maintain the equipment. Quincy Compressorstrongly recommends that any or all person(s) in charge ofinstalling, maintaining, or servicing one of our compressors readand understand the entire contents of this manual in order toperform such duties safely and efficiently.Freight DamageIt is extremely important that you examine every carton and crate as soon asyou receive it. If there is any obvious damage to the shipping container, havethe delivering carrier sign the freight bill, noting the apparent damage, andrequest a damage report.If concealed damage is discovered at a later date, the carrier mustbe notified within 15 days of initial receipt of freight. Concealedshipping damage is not covered by Quincy Compressor Warranty.Contact the carrier as soon as possible, giving them an opportunity to inspectWARNING !