1of2Assembly Instruction Sheet #IS-COR8410K _R1For Style COR8410KPackage ContentsPlease go to for product cleaning tips. Go to the selection.(1) Medium Base Bulb 100W Maximumwww.quoizel.com Care + MaintenanceFixture can only be mounted in the direction indicated on page 2.Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.Light Source:Estimated Assembly Time:Preparation:20-30 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts arepresent. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacementparts.Warnings and CautionsTurn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We stronglyrecommend that a licensed, professional electrician perform the installation.Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.A Crossbarx 1Nipplex 1BLock Washerx 1Hex Nutx 1CDMounting Ballx 1EF Fixture Bodyx 1STEP 1 Remove Cage with Glass-A. By using screwdrivers, remove the screw and hex nut from tabs.B. Unscrew lock screws and remove the cage with glass from theFixture Body (F).ScrewHex NutCage with GlassLockScrewFFFigure 1TabSTEP 2 Install Bulb and Cage with Glass-A. Install the bulb onto the socket and screw snugly into place.B. Place the tab on the cage onto the tab on the backplate and alignmounting holes on the cage to holes on the fixture hood. Securethem together with lock screws. Hand tighten until snug.C. Place the screw back onto tabs and secure with the hex nut. Handtighten the screw until snug with screwdrivers.STEP 3 Install Crossbar and Nipple-A. Secure the Crossbar (A) to the outlet box with outlet box screws (notsupplied). Tighten until snug.Figure 3FLock ScrewBulb (notsupplied)Cage withGlassSocketHex NutTabTabScrewFigure 2Mounting HoleHoleBackplateFixture Hood2017 QuoizelInc. RevisedDate:2017-11-23Thank you for purchasing a Quoizel product.Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184or visit us on-line at www.quoizel.comOutlet BoxOutlet Box Screw(not included)Green GroundScrew A