Quoizel QR3700 Installation Manual

Quoizel QR3700 Installation Manual Manual pdf 1 page image

1of3For Style QR3700Please go to for product cleaning tips. Go to the selection.marking pen, 1/ ”drill bit drill.Integrated LED 37W30-45 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts arepresent. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Missing Parts? Contact your original place ofpurchase.www.quoizel.com Care + MaintenanceLight Source:Estimated Assembly Time:Preparation:Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses, 8andNote: This mirror can be mounted over an electrical outlet box or on the wall and plugged into an outlet.Warnings and CautionsTurn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We stronglyrecommend that a licensed, professional electrician perform the installation.Package ContentsAEScrewx 7Mirrorx 1B Wall Anchorx 7CCord CoverBackplatex 1D Cord Coverx 2DIRECT MOUNTING MIRROR TO THE WALLInstallation Guide #IS-QR37002018 QuoizelInc. ReleasedDate:2018-04-16visit us on-line at www.quoizel.comStep 1A - Identify Locations for Wall AnchorsA. The template is provided to assist you in mounting the mirror. Thetemplate is a full size drawing of your mirror and includes the wallanchor mounting locations that can easily be transferred to the wall,or use the mirror.Mark Wall AnchorLocations On The WallAt Arrow LocationsStep 2A - Installing 4 Wall Anchors and ScrewsA. Using a 1/8” drill bit, drill holes at each (4) locations marked on thewall surface.B. Insert Wall Anchors (B) into drilled holes completely.C. Attach Mounting Plates (F) to the Wall Anchors (B) and secure bythreading Screws (A) into Wall Anchors (B). Hand tighten until snugwith screwdrivers.MarkFMountingPlatex 2TEMPLATE Figure 1A(Step 1A Continued)Place the template or the mirror on the wall in the location selectedfor the mirror. Make sure the template or mirror is level and in thecorrect position. Secure the template to the wall then mark thelocations of the 4 wall anchors as indicated on the template. Removethe template from the wall.BAFFigure 2ASTEP 3A Hang Mirror-A. With the help of anotherperson place the hanging baron the back of the Mirror (E)onto Mounting Plates (F).Making sure hanging bar issecurely hung onto MountingPlates (A) before letting go ofthe Mirror (E).Figure 3AFHanging BarE

/ 3

Related manuals for Quoizel QR3700