Quoizel QR5138 Installation Manual

Quoizel QR5138 Installation Manual Manual pdf 1 page image

1of2For Style QR5138Installation Guide #IS-QR51381of2Package ContentsADMirror Hangerx 2Mirrorx 1B Self-tapping Screwx 4Step 1 Identify Self-tapping Screws Locations for mounting theMirror Hangers By Using Template-The template included with package is provided to assist you in placingthe mirror in the location you desire. The template is a full size drawingof your mirror and includes hanger mounting locations that your mirrormaybe hung.Place the template on the wall in the location you have selected foryour mirror. Once you have the template in the location you desire andmaking sure it is level you may tape or pin the template to the wall. Nowyou may mark the holes for the mounting hardware as indicated onyour template. You may mark the mounting hardware location by eitherusing a pin and pushing it through the template leaving a small hole onthe wall. Or you may use a pencil and place a mark on the wall througha small hole you cut into the template at the correct mounting location.Remove the template from the wall and install the Mirror Hangers.C Metal Partx 2Mark Self-tapping Screws LocationsOn The Wall Through (4) 0.25” Dia. Holes0.25”0.75”28”22”25.25”2” Dia.0.25” Dia. 11.75”11.75”TOPTEMPLATEFigure 1STEP 3 Hanging the Mirror-A. Attach Metal Parts (C) onto axles on the sides of the Mirror (D) withthe cap end of Metal Part (C) against Mirror Hangers (A). By holdingMetal Parts (C) with Mirror (D) to hang the Mirror (D) to MirrorHangers (A) on the wall.Clean glass with household glass cleaner. Retain this sheet forfuture reference.ACDAxleCap EndFigure 3E Wall Anchorx 4STEP 2 Installing the 2 Mirror Hangers-A. Using a 1/8” drill bit, drill holes at each (4) locations marked on thewall surface.B. Insert Wall Anchors (E) into drilled holes completely.C. Using Self-tapping Screws (B) provided with the Mirror Hangers (A)attach the 2 Mirror Hangers (A) to Wall Anchors (E).BAFigure 2MarkE2019 QuoizelInc. ReleasedDate:2019-02-23visit us on-line at www.quoizel.comPlease go to for product cleaning tips. Go to the selection.Flathead screwdriver, Phillips screwdriver, pliers, gloves, safety glasses, marking pen, 1/8” drill bit and drill.20-30 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts arepresent. If any parts are missing or damaged, do not attempt to assemble, install, or operate the mirror. Contact your original place of purchase.www.quoizel.com Care + MaintenanceTools Required:Estimated Assembly Time:Preparation:Warnings and CautionsThese instructions are provided for your safety. It is very important you read them completely before installing the mirror.

/ 2

Related manuals for Quoizel QR5138