Quooker PRO3-VAQ E Installation Manual
Also see for PRO3-VAQ E: GuideInstallation guideInstallation guideInstallation guide
                | |
Connecting wasteThe Quooker tank releases expansion water via the inlet combination which isfed into the grey funnel. The funnel is connected to the waste pipe via thesupplied waste hose. The drilling kit, also supplied, can be used to make aconnection to the waste pipe.It is important to keep the height distance between the inlet combination andthe connection to the waste pipe as large as possible to prevent waste waterfrom flowing back.1 23 41 Drilling holeUsing the drill bit supplied, drill andtap in one operation a threaded holein the waste pipe. Drill slowly so thatthe PVC does not melt. Turn back anti-clockwise to preserve the thread.2 Fit connectorFirst try to screw the PVC connector inthe hole before fitting permanentlywith PVC glue.3 Connect hoseto waste pipeSlide the waste hose over the PVCconnector.4 Connect hose toinlet combinationCreate a u-bend (or loop) in the hoseand connect it to the funnel of theinlet combination. The u-bend willcreate a water lock to block smellsfrom the waste pipe. As the water isbeing heated, the inlet combinationwill release drips of water into thegrey funnel. The open funnel isrequired to prevent pressure build-up.D |
Related manuals for Quooker PRO3-VAQ E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine