Qvis APOIP-BL User Manual

Also see for APOIP-BL: Quick setup guide

Contents

Qvis APOIP-BL User Manual Manual pdf 37 page image

© Copyright Qvis ®. All documentation rights reserved. 314 Quick Configuration Tool4.1 OverviewQuick configuration tool can search current IP address and modify IP address. At the same time, you canuse it to upgrade the device.Please note: the tool only applies to the IP addresses in the same segment.4.2 OperationDouble click the ‘ConfigTools.exe’ icon and you will see an interface just like the one shown as in Figure4-1.In the device list interface, you can view the device’s IP address, port number, subnet mask, defaultgateway, MAC address, etc.Figure 4-1 Search interfaceSelect one IP address and then right click mouse, you will see an interface like the one shown in Figure 4-2.Note: You can set the IP address, subnet mask and gateway for the network camera & PC. The networkcamera IP address and PC IP address should be in the same network segment if there is no router.Network camera default IP address is 192.168.1.108. If there is a router, please set the correspondinggateway and subnet mask.The factory default user name is admin and password is admin. For security reasons, please modify yourpassword after you first login.For detailed WEB operation, please refer to the Network Camera Web Operation Manual in theresource CD.