Qvis APOLLO 32 LX User Manual

Also see for APOLLO 32 LX: User manual

Qvis APOLLO 32 LX User Manual Manual pdf 43 page image

434.4.6 PTZ setupPicture 4.29 PTZ setup(Channel) Choose the dome camera input channel.(Protocol) Choose the corresponding dome protocol. (PELCOD as an example)(Address) Set as the corresponding dome address. Default: 1.(Note: The address must be consistent with the dome address.)(Baud rate) Choose the corresponding dome baud rate length. You can controlthe PTZ and monitor. Default: 115200.(Data bits) Include 5-8 options. Default: 8.(Stop bits) Include 2 options. Default: 1.(Parity) Include odd check, even check, sign check, blank check. Default: void.4.4.7 RS232 setupPicture 4.30 RS232 setup(Serial Port Function) Common serial port is used to debug and update programor set up specific serial port.(Baud rate) Choose the corresponding baud rate length.(Data bits) Include 5-8 options.(Stop bits) Include 2 options.(Parity) Include odd, even, mark, space.