Qvis APOLLOC4-500 Quick Start Manual

Qvis APOLLOC4-500 Quick Start Manual Manual pdf 17 page image

Copyright Qvis ®. All documentation rights reserved. 17Figure 2-62.5 EncodeEncode interface is shown as in Figure 2-7. Channel: Select the channel you want. Compression: System supports H.264. Resolution: System supports various resolutions, you can select from the dropdown list. Forthis model, main stream supports D1/CIF/QCIF. Please note the resolution may vary due todifferent channels. The extra stream supports QCIF only. Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.Note:For the 8-ch series 10.2-inch compact DVR, the 1-channel resolution is D1 (PAL: 25f/s. NTSC30f/s)/CIF/QCIF. The rest seven channels (channel 2 to channel 7) support D1 (PAL: 6f/s. NTSC:7f/s)/CIF/QCIF. Bit rate type: system supports two types: CBR and VBR. In VBR mode, you can set videoquality. Quality: There are six levels ranging from 1 to 6. The sixth level has the highest imagequality. Video/audio: you can enable or disable the video/audio. Please note the video is enabledfor main stream by default. For extra stream, please enable video first and then enable audio. Snapshot: Click snapshot button, you can see it contains the four items: mode/imagesize/image quality/snapshot frequency. Please refer to chapter 2.5.1 for detail information.Please highlight icon to select the corresponding function.Figure 2-7