© Copyright Qvis ®. All documentation rights reserved. 523.14 AUTO CRUISE (SEQUENCE)The dome supports 8 auto cruise groups and each cruisesupports 32 presets. Please check the following steps toset up cruise.1. SEQ NO.: Move the cursor here and click IRIS + toenter the Sequence Number setup. Click the up ordown button to select a preset number (1-8) and clickIRIS + to confirm.2. TITLE: Move the cursor here and click IRIS + toenter the Sequence Title setup. Check the detailsabove in DOME TITLE Settings.3. : Move the cursor here and clickIRIS + To enter. Move the cursor to EDIT and clickIRIS + enter Edit mode of sequence. Move the leftand right button to select each item.a) When the < > is on the item NO., move the up ordown button to select the Serial NO. Of thepreset in a sequence. There are up to 32presets in each sequence.b) When the < > is on the item PRESET, move theup or down button to select the preset NO. Thatthe user wants to add in the sequence.c) When the < > is on the INTERVAL, move the upor down button to select the interval timebetween each preset.d) When the < > is on the last item, move the up ordown button to select edition mode as “INS(insert)”, “ok” and “delete”.e) Click IRIS + when selecting INS to insert thesettings into the position of current Serial No.f) Click IRIS + when selecting OK to override thesettings of Current Serial No.g) Click IRIS + when selecting delete to delete thesettings of the Current Serial No.h) Click IRIS + to save all the setting and click IRISCLOSE to exit.1. DELETE/START: Move the cursor here and clickIRIS + to delete/start the current sequence.LANGUAGE: ENGLISHINFORMATIONDOME SETTINGS[MOTION]RESTARTFACTORY DEFAULTEXITMAIN MENUPRESETSCAN[SEQUENCE]PATTERNAUTO TRACKINGBACK EXITMOTIONSEQ NO. : 1TITLESTARTINTERVAL: 005BACK EXITSEQUENCE- - - ----- - ------- - - - ----- - --------ADD：01 DELBACK EXITSEQUENCE
