© Copyright Qvis ®. All documentation rights reserved.DCR Demontrations:4.3 On Screen Display (OSD) control adjustmentMaking adjustments to the image size, position and operating parameters of the displayis quick and easy with the ‘On Screen Display Control system’. A short example is givenbelow to familiarise you with the use of the controls. The following section is an outlineof the available adjustments and selections you can make using the OSD. To makeadjustments in the On Screen Display, follow these steps:1. Press the MENU Button, then the main menu of the OSD appears.2. To access a control, use the buttons on the monitor. When the icon you wantbecomes highlighted, press the AUTO/SET Button.3. Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Buttonto select other sub-menu items.4. Press the MENU button once to return to the main menu and to select anotherfunction.5. Press the MENU button twice to exit from the OSD.ON OFF ON OFF