30Advanced OperationsHandset and Base OperationConference CallingThe 2652 is capable of supporting conference calls with up to two registeredHandsets and the Base Unit.To enter a conference call, simply access the line with two or three extensionsby pressing ON (or HANDSFREE) on the Handset or SPEAKER on the Base.The phone icon and two or three extension numbers will be displayedin the upper left corner of the Handset.Transferring CallsYou can transfer calls on the 2652 system from the Base to Handset, Handsetto Handset, or Handset to Base.Blind TransferYou can directly transfer any active call to another system extension withoutnotification by doing the following steps:• Handset or Base must be on an active call.• Press the INTERCOM key on the handset or PAGE key on the basefollowed by the number of the Handset (1, 2, 3, 4) or Base (0) that youwish to transfer the call to.• When the other extension answers, the call will automatically beconnected to the other extension.• An unanswered call will ring back to the originating Handset/Base if notanswered within 30 seconds. And if it is still not answered within another30 seconds, the call will automatically be terminated.Announced TransferYou can perform an announced transfer (call and advise another extension)of an active call by following these steps:• Handset or Base must be on an active call.• Place the active call on HOLD.• Press the INTERCOM key on the handset or PAGE key on the basefollowed by the number of the Handset (1, 2, 3, 4) or Base (0) that youwish to transfer the call to.• When the other extension answers the intercom call, explain they havean active call waiting.• Either extension can press the OFF key on the handset or PAGE key onthe base to end the intercom call.• The other extension presses ON (or HANDSFREE) on the Handset, orSPEAKER on the Base to pick up the call on hold.