Qwest vt1734 User Manual

Contents

Qwest vt1734 User Manual Manual pdf 34 page image

ADDITIONAL OPERATING TIPSOUT OF RANGE INDICATIONWhen the handset is in Phone Onmode and moved to a point where it andthe Base Unit can no longercommunicate, the Handset will beeptwice and display OUT OF RANGE:and attempt to re-link with the Base. Ifthis occurs while you’re on a call, movecloser to the Base Unit.If the Handset does not re-establishcontact with the Base within 30 secondsof losing contact, the Handset willautomatically drop the call and turn off.If you walk out of range while theHandset is not in use, the Handset willbeep twice and display OUT OFRANGE until the user presses any key.NOTE: If the Base Unit is withoutpower, the Handset will behave as if itis out of range. Therefore, if thehandset beeps, the display OUT OFRANGE occurs, and moving closer tothe Base does not help, check theBase Unit to make sure it has power.MESSAGE WAITINGINDICATOR (for use withVoicemail)Your QW1734 is capable of detectinga visual Message Waiting signal,generated by many phone serviceproviders. If you subscribe to Voicemailservice from your local telephonecompany, and a visual message waitingsignal is provided, the QW1734 willdisplay on the right side of theHandset LCD to alert you to new,unplayed messages.On the Base, the red MESSAGE LEDwill light up to alert you to new unplayedmessages.Once you have reviewed all of yournew voicemail messages and hang upthe phone, the QW1734 will turn off theHandset and Base indicatorsautomatically. Note that there is a delayfor the indicators to turn off, as theQW1734 is waiting for an update signalfrom the telephone network.After all new voicemail messages havebeen reviewed, if the MESSAGEWAITING indicator (icon or Base LED)remains on, you can manually clear theindications as follows:• Press MENU, scroll to 9. Del MSGIcon. Press ENTER• Press YES to turn off the Handseticon and Base LED.3 4