RACOM MG102i Operating Manual
                                                                                                                                                                               | |
Contents
| 
Port The port number for a transport protocol (8902 by default).Broadcast The broadcast is always disabled in cellular networks.Replace PLC address If set, manually configure replacing the current PLC with a configuredModbus RTU address. Modbus TCP consists of the Unit ID field whichcan be changed manually by this parameter.Address translation See Protocol Server article.7.7. SYSTEM7.7.1. SystemSettingsLocal host name: The local system hostnameApplication area: The desired application area which influences the system behaviour such asregistration timeouts when operating in the mobile environment.Reboot delay: The number of seconds to wait before the reboot is initiated (might be neededfor some system-rebooting events).SyslogStorage The storage device on which logfiles shall be stored.Max. filesize The maximum size of the logfiles (in kB) until they will get rotated.MG102iGPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.126Web Configuration |
Related manuals
manualsdatabase
Your AI-powered manual search engine