RADWAG APP series Operating Instruction

Contents

RADWAG APP series Operating Instruction Manual pdf 15 page image

- 15 -7.1. Moving in user menuUser moves in menu using balance keyboard (see point no 6)7.1.1.Return to weighing functionIntroduced changes in balance memory will be saved for good afterreturn to weighing with procedure of saving changes. Press severaltimes Esc key until display indicates message SAvE?.When display indicates question press if necessary: PRINT/ENTER – confirmationof changes or ESC – resignation from introduced changes. After pressingappropriate key, balance will go back to weighing.8. WEIGHINGBefore weighing or if the conditions of work changes (e.g. if temperature ofsurrounding is higher then 3o C) balance should be calibrated.• Balance should be loaded few times by mass close to max capacity beforetaking measurements,• Check if not load balance shows „precise zero” - if measurement isstable - order , if not press key →0/T←,• by means of Units key set measure unit : [g], [kg], [ct], and if they areaccessible in factory menu [oz], [ozt], [dwt], [t], [mom], [gn],• put load on balance and read result on display ,• indication can be setting to zero many times by pressing key Esc/TARE(summary of mass loads record to balance memory cannot be bigger then itsmax capacity).