- 7 -Pay attention that the ionizer become heated during normal work.4. CONSTRUCTION OF IONIZER DJ-02 I DJ-03There are two modules in ionizer construction:(see figure below):1 – high voltage generator,2 – ionizing frame.5. UNPACKING5.1. UnpackingUnpack the ionizer and remove protective foams. Take the ionizer out off the box andput it in place of usage very carefully.6. STARTINGAir ionizer start up, requires plugging it to the mains and setting the main switch key toposition ON. The main switch key is located on housing of high voltage generator.Switching on the air ionizer is signalled by a glowing diode of the main switch key.