259.2. Result confirmationBecause of various environmental conditions it is advisable to adjust thebalance by selecting method of result confirmation as: FAST_rEL, Fast or rEL.Depending on selected option, time of weighing will be shorter or longer.Fast_rEL - fast + releaseFast - fastrEL - release.Return to weighing(see - 7.1.2. – return to weighing).

inappropriate use

staff training

standard accessories

result confirmation

autozero function

balances with internal calibration

internal calibration

external calibration

testing thickness solids

RADWAG PS Series Operating Instructions Manual

TECHNICAL DATA

BASIC INFORMATION

Monitoring the metrological parameters of the instrument

UNPACKING, ASSEMBLING AND STARTUP

Leveling

BASIC FUNCTIONS

KEYBOARD

START-UP

USER MENU

Moving through user menu

WEIGHING

Selection of basic measuring unit

Temporary measuring unit

Setting accessibility of balance working modes

Selection of working modes available for a user

Means of selecting one of available working modes

Dual range balance (PS 200/2000/C)

BALANCE MAIN PARAMETERS

Value release

Autozero function

Blanking of the last digit on the display

Weighing mode RAPID

OTHER PARAMETERS

Backlight of weighing result (display backlight)

Printout of all balance parameters through RS 232 port

BALANCE ADJUSTMENT

Internal adjustment

Menu adjustments settings

Adjustment test

Balances with external adjustment

Manual adjustment

External adjustment

Adjustment report printout

DETERMINING CONTENT OF A PRINTOUT FOR GLP PROCEDURE

BALANCE WORKING MODES

Parts counting of the same mass

Checkweighing (HiLo) with reference to set standard

Percent setup

Reference mass determined by weighing

Reference mass inserted to balance memory by a user

Working mode FiLL

Density determination of solids and liquids

Testing thickness solids

Totalizing

RS 232 FUNCTIONS

Baud rate

Continuous transmission

Continuous transmission in current measuring unit

Setting operation mode for RS 232 interface

Determination of data type sent through RS 232 output

Minimal mass required for activation of automatic printout

COOPERATION WITH A PRINTER OR A COMPUTER

Cross-section through connecting conductors

Printing date with specified date and time

Format of data sending

UNDER HOOK WEIGHING

ERROR MESSAGES

ADDITIONAL EQUIPMENT

Computer software

PS Series


Contents Table Of Contents Table Of Contents inappropriate use staff training standard accessories result confirmation autozero function balances with internal calibration internal calibration external calibration testing thickness solids	259.2. Result confirmationBecause of various environmental conditions it is advisable to adjust thebalance by selecting method of result confirmation as: FAST_rEL, Fast or rEL.Depending on selected option, time of weighing will be shorter or longer.Fast_rEL - fast + releaseFast - fastrEL - release.Return to weighing(see - 7.1.2. – return to weighing). Previous Next / 74