RAIS Poleo II 106 SST User Manual

35English RAIS - Manual for RAIS Poleo II, RAIS Epoca IIInstallationThe stove can be free standing on the floor or hung on a non-combustible wall. In addi-tion, it may be built into a wall (see specifications).When installing the wood burning stove, there are some rules which MUST be followed:The stove must be set up and installed in accordance with all current national and localrules and reulations. Local authorities and a chimney specialist should be contacted priorto set up.It is prohibited to carry out unauthorised alterations to the stove.There must be plenty of fresh air in the room where the stove is being installed, in orderto ensure proper combustion. Note that any mechanical exhaust ventilation - e.g. anextraction hood - may reduce the air supply. Any air grates must be placed in such a man-ner, that the air supply is not blocked.The floor structure must be able to carry the weight of the wood burning stove, as well asthe weight of a chimney, if necessary.The stove is placed on fireproof material (for the freestanding model).As for the wall-mounted version, the wall must be non-combustible, and must supportthe weight of the oven as well as a possible chimney. The wall bracket (accessory) is fittedwith suitable boltsWhen you choose where to set up your RAIS wood burning stove, you should considerthe heat distribution to the other rooms. This will enable you to get the best use out ofyour stove.The stove should be set up at a safe distance from inflammable materials.See the manufacturer’s plate on the wood burning stove.Upon receiving the stove must be inspected for defects.NOTE!!RAIS A/S recommends that the stove is installed by a qualified/competent Rais dealer or a fireplace fitter recommended by anauthorized RAIS dealer.See www.rais.com for dealer list.