RAIS VISIO 4 Series Installation Manual
Also see for VISIO 3 Series: Instructions for installation, use and maintenanceInstructions for installation, use and maintenanceInstallation guide
                                                                                                            | |
Contents
| 
INSTALLATION MANUALYour new gas fireplace in generalThis RAIS product is a highly efficient convection gas fireplace with a sealed combustion chamber fora balanced flue system. The fireplace has variable heating power and is equipped with a burner whichhas been developed using the latest burner technology.Before installationAll local laws and provisions should be studied before installation. Always check the national buildingand gas regulations.In addition, it should be confirmed that the information on the information plate relating to gas typeand gas pressure are in accordance with the local gas conditions that the fireplace shall be installedunder. The gas supply should be examined to ensure that it can supply the required amount of gasand the required pressure.It is recommended that gloves are worn when installing the gas fireplace to avoid fingerprints onglass, etc.Gas connectionThis fireplace may only be installed, adjusted and serviced by an authorised and qualified heatingand plumbing/gas technician. The installation must comply with local and national building and gasregulations, and the instructions in the installation manual must be followed. The installation manualand user manual must be left with the customer, who must keep the manuals for later use. The manualsare necessary when the fireplace is to be serviced.The pipe on the gas hose has an external diameter of 8 mm or 10 mm, depending on the model.When it has been determined where the fireplace shall be installed, a gas installation with a stopcockin the vicinity of the fireplace must be executed to ensure that the gas supply and the fireplace canbe connected.Since this fireplace is equipped with a sealed combustion chamber, a floor plate is not necessary.If the fireplace is connected to bottled gas, it may only be connected to bottle gas that is equippedwith a gas regulator (low pressure regulator) that supplies the correct gas pressure.Ensure that the balanced flue system is not blocked in any way and is free of vegetation in the formof trees, bushes, etc.The glass must always be cleaned on the outside before the fireplace is lit. Fingerprints must be wipedoff as these can burn into the glass.GB - 5GB |
Related manuals for RAIS VISIO 3 Series
RAIS attika VISIO Series Installation Manual
RAIS VISIO 100 F Installation Manual
RAIS VISIO 100 RD Installation Manual
RAIS 600-1 Installation Manual
RAIS Caro 90 Installation Manual
RAIS CARO 90 G Installation Manual
RAIS NEXO 100 GAS Installation Manual
RAIS attika 600 MAX-1 Installation Manual
RAIS Visio 70 RD Manual
RAIS Visio 70 F Manual
This manual is suitable for:
VISIO 3 SeriesVISIO 4 SeriesVISIO 5 SeriesVISIO 6 SeriesVISIO 7 SeriesVisio Gas 160-45 FVisio Gas 160-45-32 3SVisio Gas 160-45-32 LCVisio Gas 160-45-32 RCVisio Gas 40-55-90 RDVisio Gas 40-55-90 TVisio Gas 43-49-65 RDVisio Gas 43-49-65 TVisio Gas 70-43 FVisio Gas 70-43-39 3SVisio Gas 70-43-39 LCVisio Gas 70-43-39 RCVisio Gas 90-55 FVisio Gas 90-55-39 3SVisio Gas 90-55-39 LCVisio Gas 90-55-39 RC
manualsdatabase
Your AI-powered manual search engine