Icon DescriptionMix Mode Mix ModeAir is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy con-ditions that require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture onthe windshield.Climate Control OFF ButtonPress and release this button on the touchscreen, or push the faceplate button, to turn the Climate Control System off.CAUTION!Failure to follow these cautions can causedamage to the heating elements:• Use care when washing the inside ofthe rear window. Do not use abrasivewindow cleaners on the interior surfaceof the window. Use a soft cloth and amild washing solution, wiping parallelto the heating elements. Labels can bepeeled off after soaking with warmwater.• Do not use scrapers, sharp instru-ments, or abrasive window cleaners onthe interior surface of the window.• Keep all objects a safe distance fromthe window.Climate Control FunctionsA/C (Air Conditioning)The Air Conditioning (A/C) button allows theoperator to manually activate or deactivatethe air conditioning system. When the airconditioning system is turned on, cool dehu-midified air will flow through the outlets intothe cabin. For improved fuel economy, pressthe A/C button to turn off the air conditioningand manually adjust the blower and airflowmode settings. Also, make sure to select onlyPanel, Bi-Level, or Floor modes.NOTE:• If fog or mist appears on the windshield orside glass, select Defrost mode, and in-crease blower speed if needed.• If your air conditioning performance seemslower than expected, check the front of theA/C condenser (located in front of the ra-diator), for an accumulation of dirt or in-sects. Clean with a gentle water spray fromthe front of the radiator and through thecondenser.MAX A/CMAX A/C sets the control for maximum cool-ing performance.Press and release to toggle between MAX A/Cand the prior settings. The button illuminateswhen MAX A/C is on.41