RBI FUTERA III Series Installation & Operation Manual

Also see for FUTERA III Series: User's information manual Installation and operating instructions Manual Control manual

Contents

RBI FUTERA III Series Installation & Operation Manual Manual pdf 37 page image

FUTERA III MODULATIONSTARTUP SHEETDATE: JOB NAME:TECHNICIAN: LOCATION:COMPANY: MODEL #:PHONE NUMBER: SERIAL #:PRE-STARTUP CHECK LISTNO VISUAL DAMAGE TO UNITPIPING PROPERLY CONNECTEDBOILER CIRCULATOR WIREDVENT/STACK CONNECTEDINLET AIR FILTER INSTALLED AND CLEANPROPER SERVICE CLEARANCE PROVIDEDPUMP RUNNING, HEAT EXCHANGER FULLGAS LINES PURGED, NO LEAKS, NO MISSINGTEST PLUGSBOILER STARTUP SEQUENCENote: Locate the T1 and AA terminals in the bottom-right of the electrical panel on the control relay board. Alsolocate the gas pressure tapping upstream of the main gas valve.1. Create head demand, jumper the T1 terminals on the control board.2. With gas off, check for continuous and strong spark.3. With pilot gas on, check for proper pilot flame.4. With main and pilot gas on, wait for boiler to reach 50%.5. Check combustion using calibrated flue gas analyzer.6. Record 50% fire combustion analysis below.7. Jumper the AA terminals on the control board.8. Record 100% fire combustion analysis below.COMBUSTION ANALYSIS 50% FIRE 100% FIREGAS PRESSURE (IN. W.C.)CO 2O 2CO (PPM)NET STACK TEMP.FIII-STARTUP REV 1.037

/ 40

Related manuals for RBI FUTERA III Series