RCA 14B042 User Manual

Contents

7Using the Remote ControlButtons on the Remote Control(0-9) Number buttons Allows direct access to any channel. Two buttons must bepressed to select a channel when you set ANTENNA to AIR. For channels 2 through 9,press 0 first, then the channel number (for example, 02, 12). Three buttons must bepressed when you select a channel number under 20 if you set ANTENNA to CABLE,and for channels above 19, you can enter the three digits directly. For example, 001,019, 20, 100.CODE Allows you to change your P.LOCK (Parental lock) password (see page 12).DISPLAY Displays the current channel information (such as channel, time, etc.). Pressit again to exit.FREE LISTEN This button has no function on this model.MENU Displays the Main menu.MUTE Reduces the TV’s volume to its minimum level. Press again to restore thevolume.PICTURE Allows you to toggle the available picture settings: DYNAMIC, SOFT,STANDARD, and PERSONAL.POWER Turns the TV on and off.PROG. (PROGRAM) buttons / Press the button to go to the next channel inmemory. Press the button to go to the previous channel in memory.Q.VIEW (QUICK VIEW) Allows you to go back to the previous channel selected byjust pressing the Q.VIEW button. Press again to return to your last channel.TIMER Sets the sleep timer.TV/AV Toggles between regular TV programming and the Video Input Channels (TV1/AV1/AV2).VOL (VOLUME) buttons / Increases and decreases the volume.Battery PrecautionsThese precautions should be followed when using batteries inthis device:1. Use only the size and type of batteries specified.2. Be sure to follow the correct polarity when installing thebatteries as indicated in the battery compartment. Reversedbatteries may cause damage to the device.3. Do not mix different types of batteries together (e.g.Alkaline and Carbon-zinc) or old batteries with fresh ones.4. If the device is not to be used for a long period of time,remove the batteries to prevent damage or injury frompossible battery leakage.5. Do not try to recharge batteries not intended to berecharged; they can overheat and rupture. (Follow batterymanufacturer’s directions.)Installing the BatteriesBefore using the remote control for this first time, youneed to install batteries.1. Open the battery compartment cover.2. Install two “AAA” batteries (not supplied).3. Replace the battery compartment cover.The batteries may last approximately one yeardepending on how much the remote control is used.For best performance, it is recommended that batteriesshould be replaced on a yearly basis, or when theremote operation becomes erratic. Do not mix old andnew batteries or different types.