115. Connect the handset cord:Plug one end of the coiled handset cord into the side of the base andthe other end into the jack on the handset, and place the handset inthe cradle.6. Check for a dial tone. Lift the handset and listen for a dial tone. Ifyou hear a dial tone, the phone is properly installed.Attaching the Desktop Pedestal1. Turn the phone over so that the bottom of the base is facing upand the end with data port and line jacks is pointing away fromyou.2. Turn the desktop pedestal so that the side with four rectanglerubber feet is facing you.3. Insert the tabs on the pedestal into the two lower slots on thebottom of the base, then push the pedestal downward until thetabs on the top of the pedestal snap (lock) into place.Connections and SetupA B