RCA 27F501TDV User Manual

Also see for 27F501TDV: Technical specifications

Contents

10Inserting Batteries1 2 3Operation• Aim the remote control at the remote sensor and press controlbuttons to operate.• Operate the remote control within 30° angle on either side of theremote sensor, up to a distance of Approx. 5 meters (16 ft.).Remote control (continued)Replace the compartmentcover.Install two "AAA" batteries(supplied), paying attention to thepolarity diagram in the batterycompartment.Open the batterycompartment cover in thedirection of the arrow.Approx. 5 meters (16 ft.)Battery precautionsThe precautions below should be followed when using batteries in this device:1. Use only the size and type of batteries specified.2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury frompossible battery leakage.5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow batterymanufacturer’s directions.)• Press POWER to turn the TV/VCR/DVD on or off.• Select your desired operating mode (TV/VCR or DVD) using TV/VCR or DVD.• Press CH +/– to move through the channels one channel at a time.• The Arrow buttons ( / / / ) are also used to navigate on-screen menu system.• You can directly access specific channels using the number buttons.Remote control basics5L00101AE(06-11) 2/25/04, 3:07 PM10