RCA 32F531T User Manual

Contents

RCA 32F531T User Manual Manual pdf 25 page image

Chapter 4 23Graphics contained within this publication are for representation only.Using the TV’s Menu SystemColor Warmth Press the right arrow to scroll through the color adjustments: Coolfor a more blue palette of picture colors; Normal; and Warm for a more red paletteof picture colors.Brightness Adjusts the brightness of the picture.Contrast Adjusts the difference between the light and dark areas of the picture.Color Adjusts the richness of the color.Sharpness Adjusts the crispness of the edges in the picture.Note: Sharpness is not available for component video input channel (CVID2 ).Tint Adjusts the balance between the red and green levels.Note: Tint is not available for component video input channel (CVID2) .When you change any of these picture settings, the Picture Preset changes toPersonal. Use the left or right arrow button to make adjustments. To return to thePICTURE menu, press the up or down arrow button.Tilt The TV has an extra large picture tube that makes it vulnerable to the effectsof the Earth’s magnetic field, which might cause the picture to tilt slightly. Youmay need to adjust the picture tilt.Go BackAuto Ch. SearchList & LabelsClosed CaptionAuto TuningLanguageSETUP. . .. . .. . .. . .English . . .Setup MenuAuto Ch. Search (Auto Channel Search) Allows you tochoose your signal type and begin an auto channel search.Signal Type Press the left or right arrow to togglebetween the signal your TV is receiving. Choose Cable ifyou are currently using cable or a cable box for TVsignals. Choose Antenna if you are currently using anoff-air antenna for TV signals.Start Searches for channels the signal is receiving andstores them in the TV’s channel list. Go to page 8 formore information.List & Labels Edit the channels in the list or choose labelsfor each channel. For example, if channel 12 is NBC, you canuse this feature to label it NBC so it appears on-screen aspart of the Channel Banner.To delete a channel from the channel list, highlight Channeland use the left or right arrow button to select the channel.Then highlight In list and press the OK button. The boxshould no longer display a check mark.To add a label to a channel, select the channel in the Channeloption. Press the down arrow button to highlight Label. Pressthe right arrow button to highlight the first space. Use theup or down arrow button to ascend or descend through thecharacters. Continue to press the right arrow button tohighlight the space and the up or down arrow button to adda character. Press OK when you’re finished adding a label.Closed Caption Many programs are encoded with closed-captioning information, which lets you display the audioportion of a program as text on the TV screen.