ScheduleThe Schedule menu lets you create timers for either viewing orrecording programs. The GUIDE Plus+ system allows one-buttonrecording if you have connected the IR controller to your VCR.See the Setup and Connections section of this manual for moredetails on connecting the IR controller.To schedule a program to watch or record:1. Press GUIDE to bring up the GUIDE Plus+ system.2. Highlight a program within the Channel listing.3. Select Watch or Record from the Action buttons bar.Thetimer is then automatically logged into the Schedule menu.4. If you select Record, make sure to place a blank tape in theVCR and leave the VCR turned off.The program information window will display a confirmationwhen you have successfully created a timer to watch or record.If you have selected two programs to watch or record whichbegin at the same time or overlap, you will receive a timerconflict message. The GUIDE Plus+ system will not schedule aconflicting timer, therefore you must choose between the twoprograms.To remove or change the frequency (daily, once, or weekly) of ascheduled event, access the Schedule Menu from the Menu bar.1. Press GUIDE to bring up the GUIDE Plus+ system.2. Press MENU to highlight the Menu bar.3. Use the arrows to highlight the Schedule menu selection.4. Use the up and down arrows to highlight the program youwant to edit. Then use the Schedule Menu Action Buttons asdescribed in the next section.ScheduleMenuActionButtonsSchedule- MenuSelectionSchedule Menu Action ButtonsWhen viewing the Schedule menu the following Action buttonswill appear on the bar:Remove Highlight the Watch or Record timer you wish toremove from the schedule and press 1 on the remote.Change Highlight the Watch or Record timer you wish tochange and press 3 on the remote to toggle the frequencybetween the following choices:DALLY records the same program each day Mondaythrough Friday.ONCE records only on that day.WEEKLY records the program each week at the same time.42