Chapter 3 15Graphics contained within this publication are for representation only.Using the TV’s Features4. Choose which channel you want to set:Set VCR1 Lets you set up the channel the TV tunes to when you press the VCRbutton.Set VCR2 Not available with your remote control.Set SAT/CABLE Not available with your remote control.Set DVD Lets you set up the channel the TV tunes to when you press the DVDbutton.5. Press the right arrow button to select the choice that matches the way youhave the component connected to this TV.The choices and a brief explanation follow:N/A Choose this if you don’t have this particular componentconnected to the TV, or if you don’t want the TV toautomatically tune to the correct channel when you’re usingthis component.CH02 (SAT/CABLE only- Not available with your remotecontrol).CH03 or 04 Component is connected to the TV ANT jack onthe back of the TV, and you want the TV to tune to channel 3or 4 when you press the corresponding button on theremote. Reminder: make sure the component’s Channel 3/4switch is set to the appropriate channel.VID1 Component is connected to the VIDEO, S-VIDEO IN, orY, Pb, Pr jack on the back of the TV and you want the TV totune to a video or component input channel when you pressthe corresponding button.FRNT (Front Video Input) Component is connected to theVIDEO jack on the front of the TV and you want the TV totune to the front video input channel when you press thecorresponding button.Go BackSet VCR1Set VCR2Set SAT/CABLESet DVDAUTO TUNINGVID1 . . .VID1 . . .CH02 . . .CH03 . . .Parental Controls and V-ChipThe choices in the USA V-CHIP menu involve software inside your TV (referred to asV-Chip) which allows you to block TV programs and movies based on violence, sex,or other content you may believe children should not view.Once you block programs, you can unblock programs by entering a password.By default, the software inside your TV is turned “off.” For instructions to turn onV-Chip, go to page 21.