RCA 42LA45RQ User Manual

Also see for 42LA45RQ: Specifications

Contents

23. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with theinstallation instructions.24. To reduce the risk of electric shock, the grounding of center pin of plug must be maintained.25. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded to providesome protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code,ANSI/NFPA NO.70, provides information with respect to proper grounding of the mast and supporting structure,grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dischargeunit, connection to grounding electrodes, and requirements for the grounding electrodes. (See Diagram Figure A.)ANTENNALEAD tNWIREGROUND CLAMPANTENNADISCHARGE UNIT(NEC SECTION 810-20)ELECTRIC SERVICEEQUIPMENTGROUNDING CONDUCTORS(NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PARTH)Diagram Figure ASafety StrapCaution: Pushing, pulling or climbing on the TV may cause the TV falling. Do not let children climb or hang on the TV.Always place the TV on a sturdy, level, sable surface that can hold the weight of TV. And if possible, secure the TV accordingto the instruction below (Note: The fastening components such as screws are not supplied with TV).Step one: Insert the M6 mounting screws into the upper two wall mounting screw holes and fasten them (Figure A).Step two: Insert anchors to wall and connect the bolts and anchors with ropes or chains (Figure B).M6 ScrewsEnglish-6Figure A Figure BWall