RCA 42PA30RQ User Manual

Also see for 42PA30RQ: User manual User manual Specification sheet User manual User manual

Contents

I|] " m]m]l_l _m I] mANT/CABLE: Connect to receive the signal from your antenna or cable via coaxial cable.Head phone: Connect a 3.Smm headphone for personal audio.Digital Audio-out: Connect a coaxial cable for digital audio output.AUDIO OUTPUT L/R: Connect double-channel coaxial cables for analog audio output.Note:• Digital Audio-out and AUD/O OUTPUT L/R are supposed to be connected to audio poweramplifer, which proddes smoother and more powerful sound performance.R-AUDIO-L/AV, Video In: Connect an AV device that has composite video jacks, such as a VCRor a DVD player. To access device connected to these jacks, press the INPUT button on yourremote; then press the up/down arrow to select AV. Press the ENTER button at last to confirm.• AUDIO-L: Left audio channel connection. The left audio connector is usually white. For mono audiosources, be sure to use the left AUDIO INPUT.• AUDIO-R: Right audio channel connection. The right audio connector is usually red.Note:• The AV input (Video In), COMPONENT I Lnput _, Pb, Pr) share the same audio Lnput jacks R-AUD/O-L/AV.COMPONENT 1,2 Y/Pb/Pr: Connect a device that has component video jacks, such as a DVD player.To access device connected to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down arrow toselect Component1 or Component2. Press the ENTER button at last to confirm.• Y/Pb/Pr (Component Video): They provide good picture quality because the video signal is separated into three components.Use three video-grade or component video cables for the connection. When using Y/Pb/Pr, make sure you connect left andright audio cables to the Audio L and Audio R jacks.HDMI1/DVl, 2, 3: (High-Definition Multimedia Interface) It provides an uncompressed digital connection that carries both videoand audio data by way of an integrated mini-plug cable. Connect to HDMI/DVl devices, see page 14.PC INPUT VGA: Connect your computer or other device with a VGA output to this jack using a 15-pin, D-sub cable.SOUND/DVI: Use to obtain sound when a PC is connected to TV. Use 3.5mm stereo mini-pin cable to connect PC to TV.SERVICE: For service use only. Do not connect any device.AC-IN: AC power input.English-16