Please refer to the picture given below:TV 42PA30RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out theinstallation according to the instructions below.Step OnePlace the TV faced down on a soft cloth or cushion to prevent the PDP panel from being damaged.The PDP panel can be scratched easily, so please:1. Choose an absolutely flat surface to place the TV on. Use soft cloth or cushion to face the TV panel. Do not put TV on thetable directly.2. Always unplug the AC cord first when installing/removing the stand.Step ThreeInsert six M4 machine screws (all same in size) and tighten them.Step TwoTake out the stand and insert the stand into the installing slot in the lower part of the TV, then put the stand to relevant position ofthe TV set until all the holes match each other completely.10TV Stand InstallationRS01TM412HPedestal Screws Quantity Part #6pcsM4 x 12mm