Chapter 1 13Connections & SetupTV/VCR/DVD + Receiver1A. Connect the Dolby Digital or DTS receiver to the TV/VCR/DVDIf you have a Dolby Digital or DTS receiver with a Digital Input jack, connect an opticaldigital cable (not provided) into the OPTICAL DIGITAL OUT jack on the TV/VCR/DVDplayer and to the Digital Input jack on the back of the receiver. You must also set thedigital output setting in the DVD setup menu (Chapter 5 has details). Also, check theaudio within the DVD Options menu to make sure it is set up correctly (Chapter 4 hasdetails).Note: The illustration on the left shows a digital optical cable connection. If your receiver has acoaxial Audio In jack, use a shielded (coaxial) video or audio cable with RCA plugs at both ends toconnect the coaxial digital jacks on the TV/VCR/DVD and the A/V receiver.or1B. Connect the A/V receiver to the TV/VCR/DVDConnect the A/V cables to an A/V (audio/video) receiver. Connect audio cables to theTV/VCR/DVD’s LINE OUT AUDIO (L and R) jacks and the other ends to the receiver’scorresponding Audio Input jacks.Go to page 14
