RCA BRC3073 User Manual

Also see for BRC3073: Manual de usuario

Contents

5Power SupplyA. Using the Car Power AdapterThe included 12V car power adapter is designed for use with vehicles that have a 12V, negative groundelectrical system.Cautions:• Use this unit only with the included 12V car power adapter. Use with other car adapters could damage theunit, or even your vehicle.• The included 12V car power adapter is for use with this unit only. Do not use it with any otherequipment.• In the interest of traffic safety, drivers should not operate the unit or view videos while driving.• When the inside of the 12V power outlet is dirty with ashes or dust, the plug section may become hot dueto poor contact. Be sure to clean the 12V power outlet before use.• After use, disconnect the 12V car power adapter from both the unit and 12V power outlet.• If the unit is not properly attached to a vehicle, it may become airborne in the event of an accident andcause damage, injury, or death.• Check your local traffic laws for rules governing the use of video devices in vehicles.IMPORTANTThis car adapter is for use with12 volt batteries only.WARNING:Disconnect this car poweradapter when not in use. Notfor use in 24V vehicles.B. Using the AC power AdapterUsing the provided AC power adaptoronly and should be connected to a mainssupply within these parameters.Cautions:• Turn off the unit before unplugging the AC power adapter to avoid damage to the unit.• When the unit is not going to be used for a long time, disconnect the AC power adapter from the ACoutlet.• The AC power adapter included with this unit is for its use only. Do not use it with other equipment.IMPORTANT• Be sure to use the unit close to the wall outlet and make it is easily accessible. If a malfunction occurs,disconnect the plug from the wall outlet at once.• When the AC power adapter is plugged in, the apparatus is not completely disconnected from the mainpower source, even when the unit is turned off.To DC IN9V-12V jackTo 12Vpower outletCar PowerAdapterTo ACwall outletTo DC IN9V-12V jackACAdapter