Connections & Setup8 Chapter 1How to Connect: TV + HD Receiver + VCR + DVD Player1. Connect your DVD Player to your TV.A. Connect the DVD player’s audio/video output to INPUT3 on the TV using audio/video cables. If your DVD playerhas an S-Video output, you can make the video connection by using the S-Video jacks instead.Notes:• If you are using an S-Video cable, you must also use audio cables. The S-Video cable only transfers videoinformation.• If your DVD player has a component video output, we recommend you use the component video input on the TVinstead of the standard video or S-Video connection.2. Connect your VCR to your TV.A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE INPUT jack on the TV.B. Connect the VCR’s audio/video output to INPUT1 on the TV using audio/video cables.3. Make sure cable or antenna is connected to your VCR.A. Connect the coaxial cable carrying your television signal (off-air or cable) to the antenna input on the VCR.ANTENNA/CABLE INPUTPOWERVIDEOAUDIOL RINPUT1INPUT2INPUT3S-VIDEOAUDIO INPUTSL RAUDIO OUTPUTSFIXED VARIABLEL R L REXT SPEAKERS EXTINTLR++HIGH RESOLUTIONINPUTG-LINKHDTV MONITORAUDIORLY PB PRCOMPONENT VIDEO INPUTANTENNA INVIDEO AUDIOL RANTENNA OUTINOUTVCRVIDEO AUDIOL RVIDEOAUDIORRLLHD RECEIVERVIDEO AUDIOL R S-VIDEODVD PLAYERCABLEOFF-AIR ANTENNAORTVVCRHDReceiverDVD12A2B34A4B 4C