RCA D40W20BYX1 User Manual

Also see for D40W20: User guide User guide User guide User guide

RCA D40W20BYX1 User Manual Manual pdf 19 page image

Connections SetupChanging Lists and Labels"II_e List & Labels part of _e setup lets you edit your channel list and choose orcreate a personal six-character label for each channel.Note: Changing List and Labels can be time consuming. You can changethese at a later time by accessing the Setup menu.1. Press the left or right arrow to scroll fllrough tlle channels and choose theone you want to edit.2. Press the down arrow {o highlight the In channel list option. Press the let)or right arrow button to add (the box is checked) or remove (tim box isunchecked) the channel from llle list.. Press the down arrow to highlight the Channel label option. Press the leftor right arrow button to scroll through the available list of 25 most commonlabels. The last option in the list allows you to create your own sLx-character label for the channel (the first letter of the label is highlighted).4. Press the 1 or 2 nmnber button to change the first letter of llle label..6.Press the fight arrow to highlight the second lette_; then press the 1 or 2nmnber button to change the second lettei; etc...When you are finished creating your label, press OK. For models D34W20and D34W20B, press CLEAR to tune to the last selecled/available channelin your channel list. For models D40W20, D40W20B, D52W20, D52W20B,D56W20, D56W20B, D61W20 and D61W20B, select Go back to go to theAuto Convergence menu.Note:If you're using an HD source (such as anHDTV tuner or HDTV satellite receiver) on theCMPNT or DVI input, you should run Autoconvergence separately for that input as well.Tune to the input you're using for the HDsource, then go to page 38 for informationon Auto convergence.Auto Convergence(for models D40W20, D40W20B, D52W20, D52W20B,D56W20, D56W20B, D61W20 and D61W20B only)Your TV's picture tubes might have been disturbed during delivery or alter youmoved the "IV, causing the color in your "1_ to be out of alignment. The colorsadjust by starting auto convergence.IMPORTANE" Auto convergence works best once the TV has warmed upfor at least an hou_ If you've just unpacked your TV, it's a good idea torepeat the Auto convergence function when the TV's been running for atleast an hour See page 38 for more information about Auto convergence.1. Press OK to begin auto convergence.2. When the auto convergence is complete, the Red center convergence menuappem:s. The cross in the middle of the screen should be yellow. If it is not,use the arrow buttons to move the red cross to overlap tl_e green cross.Press OK when adjusunents are complete.. "I]_e Blue center convergence menu appears will1 a cyan cross in the middleof {he screen. If it is not, use the arrow buttons to move Ihe blue crossto overlap the green cross. Press OK (tim TV tunes to the last selected/available channel in llle channel list).Chapter _ Graphics contained within this publication are fiar representation only. 17