RCA D52W14 User Manual

Also see for d52w14: Specification sheet

Contents

RCA D52W14 User Manual Manual pdf 14 page image

Connections & Setup12 Chapter 1�� Explanation of Jacks (in alphabetical order)This section describes the jacks you can use to make connections. There are several ways toconnect components to your TV.ANTENNA/CABLE Lets you connect a coaxial cable to receive the signal from theantenna, cable, cable box, or if using the examples on pages 6-11, a VCR.��COMPONENT INPUT Lets you connect a component video source, such as a DVDplayer.• CMP1 Y PB PR (Component Video) Provides optimum picture quality becausethe video is separated into three signals. Use three video-grade cables for theconnection. When using CMP1 Y PB PR, make sure to connect left and right audiocables to the CMP1 L and R Audio Input jacks.• CMP1 L (Audio) Provides left audio connection. The left audio connector isusually white.• CMP1 R (Audio) Provides right audio connection. The right audio connector isusually red.COMPOSITE INPUTS Lets you connect another component such as a VCR, DVDplayer, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.• VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2Video) because the color part of the picture is separated from the black and whitepart of the picture. When using VID1 S-VIDEO, make sure to connect left and rightaudio cables to the VID1 L/MONO and R Audio Input jacks.• VID1 V (Video) Provides composite video connection. The video connector isusually yellow.• VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a componentsuch as a VCR, DVD player, or laserdisc player. Their description is the same asVID1 above.Note: For each VID jack group (VID1 and VID2), you may connect either an S-Videoor Video cable. Do not connect both at the same time in either of the VID jackgroups.