RCA D52W15 User Manual
                                | |
Contents
| 
Connections & Setup6 Chapter 1Graphics contained within this publication are for representation only.TV + HD Receiver + VCR + DVD Player1. Make sure cable or antenna and/or satellite is connected to your VCR.A. Connect the coaxial cable from your cable outlet or antenna to the antenna input on the HD Receiver.B. Connect the satellite dish antenna to the satellite input on the HD Receiver.2. Connect your HD Receiver to your TV.A. Connect the audio (white and red) cables to the CMP1 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on theHD Receiver.B. Connect three video grade cables to the CMP1 Y, PB , P R jacks on the back of the TV and to the Y, PB , P R jacks on the HD Receiver.Notes: The Y, PB, P R jacks are sending the digital cable signal to the TV.If your HD Receiver has a DVI output, connect the HD Receiver to your TV using a DVI cable. Make sure to connect the left and right audio cables to the DVI L/MONO and R jackson the TV.3. Connect your HD Receiver to your VCR.A. Connect a coaxial cable to the HD Receiver’s antenna output and to VCR’s antenna input.B. Connect the audio (white and red) cables to the Audio Output jacks on the HD Receiver and to the Audio Input jacks on the VCR.C. Connect the video cable to the Video Output jack on the HD Receiver and to the Video Input jack on the VCR.4. Connect your VCR to your TV.A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input jack on the TV.B. Connect the audio (white and red) cables to the VID2 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on theVCR.C. Connect the video cable to the VID2 V (video) jack on the back of the TV and to the Video Output jack on the VCR.5. Connect your DVD player to your TV.A. Connect the audio (white and red) cables to the CMP2 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on theDVD player.B. Connect three video grade cables to the CMP2 Y, PB , P R jacks on the back of the TV and to the Y, P B , P R jacks on the DVD player.Notes: If your DVD player doesn’t have Y, P B, PR jacks, but does have an S-Video jack, connect the player to the TV’s VID1 S-VIDEO jack using an S-Video cable.If your DVD player doesn’t have an S-Video jack, connect the player to the TV’s VID1 V (video) jack using a video cable.Important: If you use the TV’s VID1 S-VIDEO or V (video) jack to connect the DVD player, you must connect the audio cables to the TV’s VID1 L/MONO and R jacks.Go to page 12ANTENNA/CABLERS-VIDEO AUDIO/VIDEO OUTPUTFIXED AUDIOVARIABLEAUDIOEXTERNAL SPEAKERSEXT/INTLEFTRIGHT+DVI-HDTVTVL/ MONO RY P B PRANTENNA INVIDEO AUDIO RANTENNA OUTINOUTVCR VIDEO AUDIOL RVIDEO AUDIOR LHD RECEIVERY P B P RS-VIDEODVD PLAYERCMP1 CMP2L/ MONO RY P B PRL/MONO RVVID1S-VIDEOL/ MONO RVVID2+L/ MONORLVRLSUBWOOFERLL RAUDIO OUTCOMPONENT INPUTSCOMPOSITE INPUTSL RY PB PRANT INSAT INS-VIDEOL RY PB P RCABLEOFF-AIR ANTENNAORSatellite ReceiverANT OUTRTVVCRHDReceiverDVD1A2A2B3A4A4B1B 3B4C3C5A 5B |
Related manuals for RCA D52W15
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine