RCA D52W17 User Manual

Also see for D52W17: Specification sheet Specification sheet

RCA D52W17 User Manual Manual pdf 14 page image

Connections & Setup12 Chapter 1Graphics contained within this publication are for representation only.Set the Menu LanguageThe first part of the setup allows you to select your preferred language for the menu system.1. Highlight your preferred language for the menu system using the arrow buttons.2. Press OK to select that language (the Channel Setup screen appears with Auto channel searchhighlighted).Complete Auto Channel SearchThis part of the setup allows the TV to search for all channels viewable through your antenna orcable TV system. This is sometimes called auto programming. Press OK to begin auto channelsearch. When the channel search is complete, press OK to access the List & Labels screen.Changing Lists and LabelsThe List & Labels part of the setup lets you edit your channel list and choose or create a personalsix-character label for each channel.Note: Changing List and Labels can be time consuming. You can change these at a later time by accessing theSetup menu.1. Press the left or right arrow to scroll through the available channels and choose the channelyou want to edit.2. Press the down arrow to highlight the In channel list option. Press the left or right arrowbutton to add (the box is checked) or remove (the box is unchecked) the channel from thelist.3. Press the down arrow to highlight the Channel label option. Press the left or right arrowbutton to scroll through the available list of 25 most common labels. The last option in thelist allows you to create your own six-character label for the channel (the first letter of thelabel is highlighted).4. Press the 1 or 2 number button to change the first letter of the label.5. Press the right arrow to highlight the second letter, then press the 1 or 2 number button tochange the second letter, etc...6. When you are finished creating your label, select Go back (the Auto Convergence menuappears).Auto ConvergenceYour TV’s picture tubes might have been disturbed during delivery or after you moved the TV,causing the color in your TV to be out of alignment. The colors adjust by starting autoconvergence.1. Press OK to begin auto convergence.2. When the auto convergence is complete, the Red center convergence menu appears. Thecross in the middle of the screen should be yellow. If it is not, use the arrow buttons to movethe red cross to overlap the green cross. Press OK when adjustments are complete.3. The Blue center convergence menu appears with a cyan cross in the middle of the screen. Ifit is not, use the arrow buttons to move the blue cross to overlap the green cross. Press OK(the TV tunes to the last available channel in the channel list).