Chapter 4 37Using the TV’s Menu SystemGraphics contained within this publication are for representation only.Continues on next page...PIP MenuDisplay ModeOff No window is displayed.PIP PIP window is displayed.POP POP window is displayed.PIP channel Allows you to choose the channel displayed in the PIP or mainPOP window. Scroll through channel list as well as the VID1, VID2 and FRNTinput channels.PIP size Allows you to choose the size of the PIP window: Small, Medium orLarge.PIP position Allows you to choose where the PIP window appears on thescreen: Top right, Top left, Bottom right or Bottom left.Note: Pip size and position are not available for POP.Setup MenuThe Setup menu lets you configure the TV to fit its surroundings and yourpreferences. To access the Setup menu, press MENU on the remote, and thenselect Setup from the main menu.Channel setupSignal Type The TV chooses the signal type during the initial setup. If youchange how you receive broadcasts through the antenna input, you mustchange the Signal type setting. Choose Cable if you are using cable or acable box for TV signals. Choose UHF/VHF Antenna if you are using an off-air antenna for TV signals.Auto channel search Searches for channels the signal is receiving. Go topage 16 for more information.Auto channel update Searches for any new channels that are not in yourchannel list and adds them to the list.List and labels Edit the channels in the list or choose labels for eachchannel. Go to page 17 for more information.PreferencesLanguage Displays a choice list that lets you select your preferredlanguage for the menus: English, Español or Français.Maximum TV volume Allows you to set how high volume turns up whenyou press the VOL+ button. Highlight Maximum volume, then press andhold OK to hear the maximum volume. Make sure the volume has not beenmuted or turned down all the way.