Connections & SetupChapter 1 15Graphics contained within this publication are for representation only.Front Panel ButtonsIf you cannot locate your remote, you can use the front panel buttons of your TV to operate many of the TV’s features.MENU/OK Brings up the Main menu. In the menu system, it selects highlighted items.CH Scans down through the current channel list. In the menu system, acts like down arrow button on the remote controland adjusts menu controls.CH Scans up through the channel list. In the menu system, acts like up arrow button on the remote control and adjustsmenu controls.VOL < Decreases the volume. In the menu system, acts like left arrow button on the remote control and adjusts menucontrols.VOL > Increases the volume. In the menu system, acts like right arrow button on the remote control and adjusts menucontrols.POWER Turns the TV on and off.Plug in the TVPlug the end of the power cord into a grounded wall outlet. Insert the plugcompletely into the outlet.Put batteries in the remote• Remove the battery compartment cover from the back of the remote bypushing the tab and lifting off the cover.• Insert 2 “AA” fresh batteries. Make sure the polarities (+ and -) are alignedcorrectly.• Replace the cover.How to Use the Remote Control toComplete the Initial SetupThe technical term is “Navigation” – how you move through the on-screen menus.The theory is the same throughout the menu screens: highlight your choice andselect it.To highlight a menu item, press the arrow buttons on the remote to highlight oneof the items listed on the screen. Use the up or down arrow button to move up ordown. Use the right or left arrow button to move right or left.To select the item that you’ve highlighted, press OK.Note: Highlighted means that the menu item stands out from other menuitems on the list (appears darker, brighter, or a different color).TV buttonArrowsOKbutton>>