Connecting Your TVHome Antenna ConnectionsFollow one of the steps below to connect an indoor or outdoor antenna to your TV (not a cable-TV system).A./"]k If the antenna cable coming from your home antenna is a 75-ohm round coaxial cable that carries only VHF (channels 2- ! 3),only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:Cable ANTENNAFrom ,.. _ _ BackHome _ ofTVAntennaVHF or UHF OnlyorVHF/UHF CombinationB-OR-If the antenna cable coming from your home antenna is a 300-ohm flat twin lead that carries only VHF (channels 2-13),only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:Cable _ ANTENNAFrom _ " Push on _ BackHome _ L _ _ ofAntenna _" TVVHF or UHF Onlyor AdapterVHF/UHF Combination (supplied)C-OR-If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that carries VHF (channels 2-13)and a 300-ohm flat twin-lead cable for UHF (channels 14-69), connect them to your set like this:Cables UHF _______ Push onFrom '1' __ ___. "__i ANTENNAHome ---!_- and BackAntenna(s) .... ofVHF -- -- TVTransformer** Antenna Mixer*(such as #AH011) (use only #193984)Note: Be sure to connect the UHF antenna cable tothe UHF, screws on the Antenna Mixer and the VHFantenna cable to the screws marked VHF.-OR-D If the antenna wires coming from your home antenna(s) are two 300-ohm fiat twin-lead cables as shown here, connect themto your set like this:Push onHome _ and " • _ ....Antenna Mixer*(use only #193984)Note: Be sure to connect the UHF antenna cable to the UHF screws on the AntennaMixer and the VHF antenna cable to the screws marked VHF.ANTENNABackofTV* _ Optional accessory available from your dealer. Only use Antenna Mixer (Stock #193984).17