RCA F27669 User Manual

Also see for F27669: Brochure & specs

Contents

Using the TV’s Features30 Chapter 3Grid Guide Action ButtonsAction buttons will change according to where you are in the GUIDE Plus+system. Be sure to look at the action bar before pressing thecommand numbers.When highlighting the program, the following Action buttons appear:• Watch Press 1 on the remote to place a timer in the Schedule for the TV toturn on and tune to the program highlighted in the channel listing. Whenthe TV turns on, the GUIDE Plus+ system will automatically appear with thescheduled program highlighted and tuned in the video window.• Go To Press 2 on the remote to bring up the direct dial box and enter thenumber of the channel you want. Press OK to highlight the channel andcurrent program in the channel listing of the Grid guide. Press OK again totune to the highlighted channel. If the video window is unlocked, it willautomatically tune to the channel.• Record Press 3 on the remote to place a timer in the Schedule for the VCRto record the program highlighted in the channel listing.If you have a cable box, changing channels on the TV will not cause thecable box channel to change while recording.Record will only appear if you have set up the GUIDE Plus+ system andspecified your VCR type.The program information window will display a confirmation when you havesuccessfully scheduled a program to watch or record.Note: If you have selected two programs to watch or record which beginat the same time or overlap, you will receive a timer conflict message.You must choose between the two programs.When highlighting the Channel names (the left column on the channel listing),the following Action buttons appear:• Lock/Unlock Press 1 to lock or unlock the video window to either stay atone channel as you browse the GUIDE Plus+ system (lock) or change asyou browse through different channels (unlock).• Go To Press 2 on the remote to bring up the direct dial box and enter thenumber of the channel you want. Press OK to highlight the channel andcurrent program in the channel listing of the Grid Guide. If the videowindow is locked, press OK to tune to the highlighted channel. If the videowindow is unlocked, it will automatically tune to that channel.Grid guidemenuselectionGrid guideaction buttonsTipPress the PIP button to lock or unlock the videowindow when the GUIDE Plus+ system is onthe screen.