USING POINT AND SELECTYou only need to know one rule when using the remote to access on-screen menus and control panels: point and select. The point and selectmethod has two steps.1. Point to a menu item using the MOVE arrows on the remote.To point up or down, press the up or down arrows. To point left orright, press the left or right arrows.2. Select a menu item by pressing MENU or OK.Selecting an item tells the TV's menu system to go ahead and makethe change or go to a place you have indicated.ENTERING SETUPThe first screen of the Interactive Setup appears automatically whenyou turn on your TV for the first time or after a power outage.1. Press MENU to begin setup or CLEAR to exit.Point and 5elect buttonsYou can also access the Interactive Setup through the Main menu:1. Press MENU to bring up the Main menu.2. Point to Setup and press MENU or OK. The first Setup screen comesup, asking you to confirm that you want to begin.You can also select a menu item byentering the item number with thenumber buttons on the remote.Press CLEAR at any _,ime to remove alldisplays from the screen and return to TVviewing.• ]12