RCA HD52W55 User Manual

Also see for HD52W55: Specification sheet

Contents

RCA HD52W55 User Manual Manual pdf 18 page image

Connections & Setup16 Chapter 1TipTo access the setup menus, press MENU andchoose Assisted Setup.Plug in the TVPlug the flat end of the cable into the power jack on the back of the TV. Then plug the other endof the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do notplug the TV into an outlet controlled by a light switch.Note: When you first plug your TV into an outlet, the Power indicator on the front panelwill light for approximately 15 seconds and then go off during the initialization of the TV.The TV can only be turned on after the Power indicator goes off. This happens every timethe TV is unplugged and plugged back in.Put Batteries in the Remote• Remove the battery compartment cover from the back of the remote by pushing down on thetab and lifting cover.• Insert 2 fresh “AAA” batteries. Make sure the polarities (+ and -) are aligned correctly withthe polarities inside the remote.• Replace the cover.Turn on the TVPress TV on the remote, or press the Power button on the TV’s front panel.Note: Pressing the TV button turns on the TV and puts the remote into TV mode. “TVmode” means that the buttons on the remote control operate the TV’s functions.DVD ON OFFAUX TVVOLMUTE GO BACKCHCLEAR MENUFORMAT SKIPOKOKTVbuttonArrowbuttonsOK buttonMENU buttonUse the Remote Control to Completethe Assisted SetupThe technical term is “Navigation” – how you move through the on-screen menus. The method is the same throughout the menu screens:highlight your choice and select it.To highlight a menu item, put the remote into TV mode by pressing theTV button then MENU. Press the arrow buttons on the remote tohighlight one of the items listed in the menu. Use the up or down arrowbutton to move up or down. Use the right or left arrow button to moveright or left.To select the item that you’ve highlighted, press OK.Note: Highlighted means that the menu item stands out fromother menu items on the list (appears darker, brighter, or adifferent color).Complete the Assisted SetupYour TV’s menu system allows you to adjust your TV’s features to beconfigured to work properly. On-screen information helps you choosesettings to match your setup. The first time you turn on your TV, theAssisted Setup screens appear automatically. Select Begin Setup to start orselect Cancel Setup to exit.