RCA HDLP61 User Manual

Contents

RCA HDLP61 User Manual Manual pdf 77 page image

Chapter 4 75Using the TV’s Menu SystemLamp Power8Digital Channel Info7Menu Language6Translucency5Color Scheme4Record Output3Screen Format2Closed Captioning1Go Back0Main Menu PreferencesPress or to point to an option, then press OK toselect it. Press to return to the menu.You can record analog and digital programs by connectingthe RECORD OUTPUT jacks to a video recorder. All signalsources can be recorded except for Input 5 (DVI-HDTV) andsome component video formats.16:9 images can be recorded in one of two ways. "Cropped"records the center of a 16:9 image and is best for playbackon a standard 4:3 TV. "Anamorphic" squeezes a 16:9 imageinto a 4:3 area; during playback on this wide-screen 16:9 TV,apply the "Stretch" format to recreate a 16:9 "wide" image.Anamorphic Mode RecordingCropped Recording (Center Cut)Lamp Power8Digital Channel Info7Menu Language6Translucency5Record OutputColor Scheme4Record Output3Screen Format2Closed Captioning1Go Back0Main Menu PreferencesPress or to point to an option, then press OK toselect it. Press to return to the menu.You can select from one of four colors for the menu systemand the channel banner. The color of GUIDE Plus+ is not affectedby the selection in this screen.PlumRasberryEmeraldSky BlueStretch The image of a 4:3 video signal is stretched horizontally by approximately 33% whilethe vertical size stays the same.Zoom The image of a 4:3 video signal increases by approximately 33% and the vertical sizeincreases by approximately 33%.Notes: There is no ability provided to change the screen format for a 16:9 video signalsince it fills up the entire area of the TV’s screen.The FORMAT button on the remote gives you access to change the format with a one-button press rather than navigating through the menu system.Normal and Stretch do not affect Record Output; Zoom may alter the original video.Some programs are copy protected and cannot be recorded. If the REC icon in the banner isdim, a recording cannot be made because of copy protection limits. If REC icon is bright,the program can be recorded.The format of some video cannot be changed even though it appears to be a 4:3 aspect-ratio picture.Use the FORMAT button to view screen formats (Zoom, Stretch) other than those with sidepanels. Some video formats may not be able to be changed with the FORMAT button.TipPressing FREEZE button also freezes RECORDOUTPUT, but not 1394 output.Record Output16:9 signals can be recorded in one of two ways: Cropped Recording (CenterCut) and Anamorphic Mode Recording. Cropped Recording records the center ofa 16:9 signal and the Anamorphic Mode Recording compresses the 16:9 signalinto a 4:3 area.Notes: To make the “cleanest” recording, avoid using PIP, the GUIDEPlus+ system, freeze function, browser, or zoom screen format. Doing sowill have unwanted effects on the recorded video.The TV does not need to be on to make a recording as long as therecording being made was set up in the GUIDE Plus+ system. When the TVis off, the Record Output may show the TV tuning channels in a dataacquisition activity. This is normal.If an unusual pattern appears when you connect your VCR input to theRECORD OUTPUT, playing a tape or switching to the VCR’s tuner removesthe pattern.Color SchemeSelect from among four colors (Sky Blue, Emerald, Raspberry, and Plum) tochange the color of the menu system and banner.Note: The guide and browser colors are unaffected.TranslucencyYou can change the translucency (see-through) level of the menu screens.Adjust the slider by using the left and right arrow buttons.Notes: This does not apply to GUIDE Plus+ system and browser.Some video formats do not support the display of translucency on-screendisplays.Lamp Power8Digital Channel Info7Menu Language6Translucency5Color Scheme4Record Output3Screen Format2Closed Captioning1Go Back0Main Menu PreferencesPressorto move the indicator to the desiredtranslucency level for the on-screen menus.The translucency level you set is applied to the on-screenmenu system and channel banner for all inputs andantennas. An exception is Input 5 (DVI-HDTV) and somecomponent video formats where translucency is set toopaque and cannot be changed.The translucency level you set does not affect GUIDE Plus+.