RCA L1510 User Manual

Also see for L23W10: User guide Specifications

Connections & SetupChapter 1 11Graphics contained within this publication are for representation only.CH.SETUPAuto SearchListNAVIGATE ▼ ▲▼▼ON/OFF SETUP MENU MENUSignal Type Cable...Search OKCH.SETUPAuto SearchListNAVIGATE ▼ ▲▼▼ON/OFF SETUP MENU MENUSignal Type Cable...Search OKChoose the Signal TypeIn order for your TV to search for channels, you need to make sureyour signal source is set correctly.1. With Ch. Setup highlighted, press the right arrow button to displaythe CH. SETUP menu.2. By default, the signal type is set to Cable. Press the right arrowbutton to highlight Signal Type. Leave the signal type set to Cableif your TV is receiving its signal from cable. If your TV is receivingits signal from an off-air antenna, press the right arrow buttonagain to change the option to Antenna.3. Press the down arrow button to highlight Search.Complete Channel SearchTo search for all channels viewable through your antenna or cable TVsystem:1. With Search highlighted, press the OK button.Note: Depending on the number of channels you receive, it maytake several minutes for the channel search to finish.2. When the search is complete, you might want to change yourchannel list. Go to Chapter 3 for instructions. If you don’t wantto change your channel list, the initial setup is complete and youcan press CLEAR to exit. The other setup options are explained inChapter 3.