SetupList & LabelsParental ControlSoundExitPictureLock Parental ControlSelect ChannelBlock ChannelButton BlockV-ChipChange PasswordA2-- -- -- --Press > or OK to change this setting.Block ButtonsSelect this option to block (disable) or unblock (enable) the TV’s side panel buttons so that theycan't be used. The remote still tunes to any channel. If you're using this to keep children fromchanging channels, remove access to any remote that is capable of operating the television whileyou have the side panel blocked. Don’t forget to lock parental controls after you change the status.If you don’t, the Button Block action will not take effect.Change PasswordThis option allows you to set a new V-Chip password. From the Parental Control Menu, highlightand select Change Password. Using the digit keys, enter a new password and press OK. Re-enterthe new password again for verification and press OK to confirm.Additional FeaturesThere are additional features available unrelated to parental controls.Screen FormatsScreen format refers to the way the picture is displayed on your TV. Press the FORMAT button on yourremote to see if a different format is available for the video you are viewing. The format changes as youpress the FORMAT button, and the format type is displayed at the top left of the screen.Analog video is sent in a 4/3 format, which your TV displays in a 16/9 format. Most digital video issent in a 16/9 format which fills your screen, but it sometimes is sent in 4/3, which does not fill yourscreen. It depends on how the station or component connected to your TV is formatting the video.If there are bars on the screen, press the FORMAT button to try a different format that may eliminatethe bars. Some bars can't be removed because of the way the format is sent by the broadcaster.Examples of the different formats for SD Video appear below.SetupList & LabelsParental ControlSoundExitPictureOld PasswordNew PasswordConfirm-- -- -- ---- -- -- --Change Password-- -- -- --Please input your old password.24 Chapter 3 Using TV FeaturesNote: For HD Video,press FORMAT tochoose from Full,Normal, Cinerama andZoom. For VGA signal,choose from Normal,Full, and Dot By Dot.For HDMI and CMPTinputs, there is also aNo Overscan format.Normal FullCinerama Zoom