Connections and SetupChapter 1 13VGA ConnectionThis is an example of a connection using the VGA jacks.AUDIOINPUT VGA INPUTPC INPUT2Don't forget: If necessary,connect antenna or cableto get a picture. Go topage 8 for instructions.1Connecting the DeviceThis connection allows you to connect to a personal computer.1. If necessary, connect your cable and/or off-air antenna as described on page 8.2. Connect your monitor cable.Connect one end of a 15-pin monitor cable to the VGA INPUT jack on the TV and theother end to the PC's video output jack. Note, if your PC's video output isn't 15-pin, you'llneed an adapter that can connect to a 15-pin monitor cable.3. Connect your audio cable.Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8" stereo mini pin) tothe VGA AUDIO INPUT jack on the back of the TV and the other end to the Audio Outputjack on the PC.Notes: The maximum panel resolution is 1366 x 768 for your TV. Be sure to set yourPC to the correct monitor output setting.The TV allows you to listen to the sound from another input while the PC is connected.Go to page 26 for more information.Viewing the PC1. Plug in the TV (see page 14 for details) and the PC, if they aren't already plugged in.2. Turn on the TV and the PC.3. Press the INPUT button on the remote control and press the up or down arrow button tohighlight VGA from the input list. Press OK to tune to the input. To go back to viewing TVchannels, press the WATCH TV button.3