37Note: Video noisereduction is available forCMPT inputs only if thesignal is 480i.Using the TV Menu Chapter 4Screen Format – Change the screen format, choosing from Normal, Center, Zoom and Stretch. Formore information about screen formats, go to page 35.Film Mode - (3:2 Pulldown) – This option automatically detects video sources that were originallyrecorded on film (such as most movies) and converts them to a different format (for TV broadcast,for example). Film Mode processes the converted signal so that it appears as close to the original aspossible. Another name for this process is 3:2 pulldown. When using Film Mode, keep these tips inmind:• The On setting (recommended) – When you check this setting, it enables the feature only when theTV detects that move playback quality could be improved.• The Off setting (box unchecked) turns off the film mode conversion. Try using this setting if you thinkthe reverse 3:2 pulldown is causing distortions in your picture.PC Settings – This option allows you to adjust the PC settings when in PC Mode.Video Noise Reduction (not available on PC or digital channels) – This setting reduces picture “static”or any type of interference. This feature is especially useful for providing a clearer picture in weak analogsignal conditions. Press the right arrow to choose between these options:Low for a softer, smoother picture that retains picture sharpness and detail.Normal for a slightly softer picture than the Low setting.High for an even softer, smoother picture than the other settings (the picture detail is somewhatdecreased)Sound MenuThe Sound Menu lets you adjust audio output. To access the Sound Menu, press MenU on the remote,and then select Sound from the Main Menu. The following audio items can be adjusted:Treble – Improves treble output.Bass – Improves bass output.Balance – Use the left or right arrows to adjust the amount of audio sent to the left and right speakers.SRS – Option On/OFF.Analog TV Sound – Controls the manner in which the sound comes through your speakers. Optionsavailable vary according to the input selected:• Mono (available for regular TV viewing only) – This option plays the sound in mono only. Use thissetting when receiving broadcasts with weak stereo signals.• Stereo – This option splits the incoming stereo audio signal into left and right channels. Most TVprograms and recorded materials have stereo audio. The word “stereo” appears in the ChannelBanner when you time to a program that is broadcast in stereo.• Second Audio Program (SAP) – This option plays the program’s audio in a second language,if available. The letters “SAP” appear in the Channel Banner when you tune to a program thatis broadcast with SAP information. SAP audio is broadcast in mono only. SAP is also used tobroadcast a program’s audio with descriptions of the video for the visually impaired.Default Audio Language – Use this selection to choose the language you prefer for dialog on digitalchannels. If your preferred language is being broadcast with a program, the TV plays it. If not, the TVplays the default option for the program (usually english in the US). The default digital channel audiolanguage options are English, French, Spanish, German, Italian, Japanese, Chinese and Korean.Current Audio Language (not available for analog channels) – Press the right arrow to choose fromthe list of languages available for the program you’re watching. The language chosen becomes yourpreferred language for all digital channels until you turn the TV off. If the language chosen is not beingbroadcast with a program, the TV plays the default language for the program (usually english in the US).Note: The menu grays out when the current channel selected is analog.