RCA L26HD35D Owner's Manual

Also see for L26HD35D - 25.9" LCD TV: Owner's manual Specifications Manual de instrucciones Guide d'utilisation

Cinema Wide3 (for letter box programs withsubtitles)To fill the width of the screen, it is extendedhorizontally. However; it is only slightly extended at thetop and the bottom.The top and bottom edges of the picture may be hidden.--1_ > f -- C ._/- "-\O / \,Full (for 16:9 source programs)Full will display the picture at the maximum size.Native (for PC mode only)Detects the resolution of the signal of the image and itwill be shown on the screen with same amount of pixels.NOTE:• Some High Definition and/or Digital broadcasts maynot allow you to change the picture size.• In HDMI or COMPONENT mode with a scanningrate of 720p or 1080i, only the Cinema Wide2 andFull picture size feature is available.• In PC Mode, only the Natural, Full and Nativepicture size features are available. In PC Mode(WXGA), only the Full and Native picture sizefeatures are available.Film modeA smoother motion may be obtained by settingthe Film Mode to "On" when you view a DVD.-4| Press SETUP/TV MENU in the TV mode.The TVmenu screen will appear.2 Press • or • to select"Picture", then press • orENTER.3 Press • or • to select"Film Mode".Press < or • to select "On" or "Off".4 Press EXIT/CANCEL to return to the normal screen.Picture controladjustment in the PC modeYou can adjust to optimize the performance ofthe TV in the PC mode.,I Press SETUP/TV MENU. The TV menu screenwill appear.3 Press • or • to select"Picture", then press • orENTER.4 Press • or • to select"PC Setting", then press •or ENTER.The PC Setting menu will appear.Press•or•to adjust.PressHotPosition:VetPosition:Clock:78to select the desired item you wantto adjust the setting.To adjust the horizontal position ofthe image on the PC mode.To adjust the vertical position of theimage on the PC mode.To minimize any vertical barsor stripes visible on the screenbackground.Phase: This must be adjusted after thefrequency of the PC mode hasbeen set to 60Hz to optimizepicture quality (page 39).Auto Adjust:To adjust the all PC settingsautomaticallyAfter adjusting, press ENTER to return to the PCSetting menu. Then continue to adjust the other items.Press EXIT/CANCEL to return to the normal screen.NOTE:• Auto Adjust feature is available only for 16:9 or 4:3format.• If no buttons are pressed for more than approx. 60seconds, the Menu-screen will return to normalMonitor-screen automatically.• The PC settings are not effective for other input modes.DNRDNR (Digital Noise Reduction) can reduce theroughness of the picture.1 Press SETUP/TV MENU in the TV mode.The TVmenu screen will appear.2 Press • or • to select"Picture", then press • orENTER.Press • or • to select"DNR". Press • or • toselect "On" or "Off".1 Press INPUT SELECT, then press •/• or 4 Press EXIT/CANCEL to return to the normal screen.Number button (6) to select the PC mode. 23