RCA L37WD250 User Manual

Also see for L37WD250: Disassembly

Contents

RCA L37WD250 User Manual Manual pdf 34 page image

Using the TV’s Features34 Chapter 3PIP (Picture-in-Picture) OperationThe PIP (Picture-In-Picture) feature lets you display a second, smaller picture on top ofthe main picture or display two pictures side by side, called POP. For more information oncustomizing the PIP feature, go to page 39. The main and PIP channels must be from differenttuners. The VGA, COMPONENT INPUTS, HDMI1/DVI, and HDMI2 can't be displayed in thesmaller window.PIPbuttonCH CTRLbuttonINFObuttonUse these buttons for the PIP featurePIP ButtonsThere are certain remote buttons that control the way the PIP windowworks:PIP Brings up the PIP window. Press PIP again to remove thewindow.CH CTRL (Channel Control) Lets you switch channel control betweenthe PIP window and the main picture. To determine whether you arecontrolling the PIP or the main picture, look at the channel banner asyou change channels or press INFO button. The PIP window has ayellow highlight around it if you are controlling it.INPUT SUB CHMENUCLEARZOOM-CH CTRLGUIDEMUTEGO BACKVOL CHON•OFFTV SAT•AUX DVD PIPPRESETSINFOZOOM+?!+-ABCDEFGHIJKLMNOPQRS TUVWXYZ_,.:=$+Using the PIP FeatureWhile you may use PIP in different ways, this basic PIP scenario should get you started. Whenwatching a channel, follow these steps.1. Press the PIP button on the remote control and the PIP window appears on the screen.2. Press the CH CTRL (Channel Control) button on the remote to highlight the PIP window.(A yellow border appears around the edge). Use the channel up and down, INPUT, orcomponent buttons that have been auto tuned, to change the PIP channel.3. To change the program in the main picture window, press CH CTRL. Then use any of theabove mentioned buttons. To go back and forth between controlling the PIP window andthe main picture, press the CH CTRL button.Using PIP with the VGA jackWhen watching content from the VGA input, follow these steps.1. Press the PIP button on the remote control and the PIP window appears on the screen.2. Press the CH CTRL (Channel Control) button on the remote to highlight the PIP window. (Ayellow border appears around the edge).Use the channel up and down, INPUT, or component buttons that have been auto tuned, tochange the PIP channel.3. To change the program in the main picture window, press CH CTRL. Then use any of theabove mentioned buttons. To go back and forth between controlling the PIP window andthe main picture, press the CH CTRL button.4. Press the PRESETS button on the remote control and go to PC Sound source. Choose PC ifyou want to hear sound from the device connected via the VGA jack. Choose PIP/POP ifyou want to hear sound from the main window.