RCA LED32A30RQ User Manual

Also see for LED32A30RQ: User manual User manual

Contents

Turning On and OffConnect the AC cord to power the LED LCD TV. At this time the TV will enter standby mode and power indicator shows red.Use Power button (_) on the top panel of TV or on the remote control to turn on the TV. After switching off the TV for 5 seconds,you can turn on TV again.Choosing TV ChannelTuning To Analog ChannelsAn analog channel has a channel number beginning with "A". Input the digital number with numeric buttons directly and pressENTER button to confirm.For example, to watch analog channel "A51 ", press "5", "1 ", "ENTER" on remote control in sequence.Note; Although there is no analog TV signal available in America, we reserve ATe! functions for some expansible use.Tuning To Digital ChannelsA digital channel has a channel number beginning with "D". Input the main digital number with numeric buttons directly, then press" --" button on remote control, and input the sub number at last.For example, to watch analog channel "D31-1 ", press "3", "1 ", ..... button. "ENTER" on remote control in sequence.Changing Channels DirectlyYou can use CHAbutton to increase channel number and CHv to decrease channel number. When no OSD (On ScreenDisplay) is used, the up/down arrows can also work as CHA/CH v buttons.Selecting Input SourcePress INPUT button on remote control to display Source Select list.Use up/down arrows to highlight the source you need and press ENTER to confirm.Adjusting TV Stand AngleThe TV cabinet can manually adjust to left or right for 15 degrees from the centre.You can adjust the angle for the best viewing effect and comfort.21